fbpx
Connect with us

The Conversation

From the Moon’s south pole to an ice-covered ocean world, several exciting space missions are slated for launch in 2024

Published

on

From the Moon’s south pole to an ice-covered ocean world, several exciting space missions are slated for launch in 2024

NASA isn’t the only space agency with exciting missions to watch for in 2024.
AP Photo/John Raoux

Ali M. Bramson, Purdue University

The year 2023 proved to be an important one for space missions, with NASA’s OSIRIS-REx mission returning a sample from an asteroid and India’s Chandrayaan-3 mission exploring the lunar south pole, and 2024 is shaping up to be another exciting year for space exploration.

Several new missions under NASA’s Artemis plan and Commercial Lunar Payload Services initiative will target the Moon.

The latter half of the year will feature several exciting launches, with the launch of the Martian Moons eXploration mission in September, Europa Clipper and Hera in October and Artemis II and VIPER to the Moon in November – if everything goes as planned.

I’m a planetary scientist, and here are six of the space missions I’m most to follow in 2024.

Advertisement

1. Europa Clipper

A spacecraft with two large rectangular panels coming off a small cylinder flies above a brown and white moon, with a brown striped planet in the background.
Illustration of what the Europa Clipper spacecraft will look like flying by Europa, a moon of Jupiter.
NASA/JPL-Caltech

NASA will launch Europa Clipper, which will explore one of Jupiter’s largest moons, Europa. Europa is slightly smaller than Earth’s Moon, with a surface made of ice. Beneath its icy shell, Europa likely harbors a saltwater ocean, which scientists expect contains over twice as much as all the oceans here on Earth combined.

With Europa Clipper, scientists want to investigate whether Europa’s ocean could be a suitable habitat for extraterrestrial life.

The mission plans to do this by flying past Europa nearly 50 times to study the moon’s icy shell, its surface’s geology and its subsurface ocean. The mission will also look for active geysers spewing out from Europa.

This mission will change the game for scientists hoping to understand ocean worlds like Europa.

The launch window – the period when the mission could launch and achieve its planned route – opens Oct. 10, 2024, and lasts 21 days. The spacecraft will launch on a SpaceX Falcon Heavy rocket and arrive at the Jupiter system in 2030.

Advertisement

2. Artemis II launch

Four people in orange spacesuits stand in a small white room.
The Artemis II astronauts at the launchpad during a ground test in September 2023 at Kennedy Space Center.
NASA

The Artemis program, named after Apollo’s twin sister in Greek mythology, is NASA’s plan to go back to the Moon. It will send humans to the Moon for the first time since 1972, the first woman and the first person of color. Artemis also includes plans for a longer-term, sustained presence in space that will prepare NASA for eventually sending people even farther – to Mars.

Artemis II is the first crewed step in this plan, with four astronauts planned to be on board during the 10-day mission.

The mission builds upon Artemis I, which sent an uncrewed capsule into orbit around the Moon in late 2022.

Artemis II will put the astronauts into orbit around the Moon before returning them home. It is currently planned for launch as early as November 2024. But there is a it will get pushed back to 2025, depending on whether all the necessary gear, such as spacesuits and oxygen equipment, is ready.

3. VIPER to search for water on the Moon

The VIPER rover to survey water at the south pole of the Moon.

VIPER, which stands for Volatiles Investigating Polar Exploration Rover, is a robot the size of a golf cart that NASA will use to explore the Moon’s south pole in late 2024.

Advertisement

Originally scheduled for launch in 2023, NASA pushed the mission back to complete more tests on the lander system, which Astrobotic, a private company, developed as part of the Commercial Lunar Payload Services program.

This robotic mission is designed to search for volatiles, which are molecules that easily vaporize, like water and carbon dioxide, at lunar temperatures. These materials could resources for future human exploration on the Moon.

The VIPER robot will rely on batteries, heat pipes and radiators throughout its 100-day mission, as it navigates everything from the extreme heat of lunar daylight – when temperatures can reach 224 degrees Fahrenheit (107 degrees Celsius) – to the Moon’s frigid shadowed regions that can reach a mind-boggling -400 F (-240 C).

VIPER’s launch and delivery to the lunar surface is scheduled for November 2024.

Advertisement

4. Lunar Trailblazer and PRIME-1 missions

NASA has recently invested in a class of small, low-cost planetary missions called SIMPLEx, which stands for Small, Innovative Missions for PLanetary Exploration. These missions save costs by tagging along on other launches as what is called a rideshare, or secondary payload.

One example is the Lunar Trailblazer. Like VIPER, Lunar Trailblazer will look for water on the Moon.

But while VIPER will on the Moon’s surface, studying a specific area near the south pole in detail, Lunar Trailblazer will orbit the Moon, measuring the temperature of the surface and mapping out the locations of water molecules across the globe.

Currently, Lunar Trailblazer is on track to be ready by early 2024.

Advertisement

However, because it is a secondary payload, Lunar Trailblazer’s launch timing depends on the primary payload’s launch readiness. The PRIME-1 mission, scheduled for a mid-2024 launch, is Lunar Trailblazer’s ride.

PRIME-1 will drill into the Moon – it’s a test for the kind of drill that VIPER will use. But its launch date will likely depend on whether earlier launches go on time.

An earlier Commercial Lunar Payload Services mission with the same landing partner was pushed back to February 2024 at the earliest, and further delays could push back PRIME-1 and Lunar Trailblazer.

5. JAXA’s Martian Moon eXploration mission

The JAXA MMX mission concept to study Phobos and Deimos, Mars’ moons.

While Earth’s Moon has many visitors – big and small, robotic and crewed – planned for 2024, Mars’ moons Phobos and Deimos will soon be getting a visitor as well. The Japanese Aerospace Exploration Agency, or JAXA, has a robotic mission in called the Martian Moon eXploration, or MMX, planned for launch around September 2024.

Advertisement

The mission’s main science objective is to determine the origin of Mars’ moons. Scientists aren’t sure whether Phobos and Deimos are former asteroids that Mars captured into orbit with its gravity or if they formed out of debris that was already in orbit around Mars.

The spacecraft will spend three years around Mars conducting science operations to observe Phobos and Deimos. MMX will also land on Phobos’ surface and collect a sample before returning to Earth.

6. ESA’s Hera mission

An illustration of two gray asteroids, next to a gold box with two large rectangular panels on either side, and two smaller crafts.
An artist’s conception of the Hera mission to literally measure the impact of NASA’s DART mission in 2022.
ESA

Hera is a mission by the European Space Agency to return to the Didymos-Dimorphos asteroid system that NASA’s DART mission in 2022.

But DART didn’t just visit these asteroids, it collided with one of them to test a planetary defense technique called “kinetic impact.” DART hit Dimorphos with such force that it actually changed its orbit.

The kinetic impact technique smashes something into an object in order to alter its path. This could prove useful if humanity ever finds a potentially hazardous object on a collision course with Earth and needs to redirect it.

Advertisement

Hera will launch in October 2024, making its way in late 2026 to Didymos and Dimorphos, where it will study physical properties of the asteroids.The Conversation

Ali M. Bramson, Assistant Professor of Earth, Atmospheric, and Planetary Sciences, Purdue University

This article is republished from The Conversation under a Creative Commons license. Read the original article.

Did you miss our previous article…
https://www.biloxinewsevents.com/?p=317763

Advertisement

The Conversation

Pagers and walkie-talkies over cellphones – a security expert explains why Hezbollah went low-tech for communications

Published

on

theconversation.com – Richard Forno, Principal Lecturer in Computer Science and Electrical Engineering, University of Maryland, Baltimore County – 2024-09-18 16:32:21

A officer examines a damaged car after thousands of pagers exploded simultaneously across Lebanon on Sept. 17, 2024.
AP Photo/Hussein Malla

Richard Forno, University of Maryland, Baltimore County

Electronic pagers across Lebanon exploded simultaneously on Sept. 17, 2024, killing 12 and wounding more than 2,700. The day, another wave of explosions in the country came from detonating walkie-talkies. The attacks appeared to target members of the militant group Hezbollah.

The pagers attack involved explosives planted in the communications devices by Israeli operatives, according to U.S. officials cited by The New York Times. Hezbollah had recently ordered a shipment of pagers, according to the report.

Advertisement

Secretly attacking the supply chain is not a new technique in intelligence and military operations. For example, the U.S. National Security Agency intercepted computer hardware bound for overseas customers, inserted malware or other surveillance tools and then repackaged them for delivery to certain foreign buyers, a 2010 NSA internal document showed. This differs from accessing a specific person’s device, such as when Israel’s Shin Bet secretly inserted explosives into a cellphone to remotely kill a Hamas bombmaker in 1996.

Hezbollah, a longtime adversary of Israel, had increased its use of pagers in the wake of the Hamas attack on Israel on Oct. 7, 2023. By shifting to relatively low-tech communication devices, including pagers and walkie-talkies, Hezbollah apparently sought an advantage against Israel’s well-known sophistication in tracking targets through their phones.

pieces of a destroyed electronic device
The second wave of explosions in Lebanon involved walkie-talkies.
AP Photo

Cellphones: The ultimate tracker

As a former cybersecurity professional and current security researcher, I view cellular devices as the ultimate tracking tool for both government and commercial entities – in addition to users, criminals and the mobile phone provider itself. As a result, mobile phone tracking has contributed to the fight against terrorism, located missing people and helped solve crimes.

Conversely, mobile phone tracking makes it easy for anyone to record a person’s most intimate movements. This can be done for legitimate purposes such as parents tracking ‘s movements, helping you find your car in a parking lot, and commercial advertising, or nefarious ends such as remotely spying on a lover suspected of cheating or tracking political activists and journalists. Even the U.S. military remains concerned with how its soldiers might be tracked by their phones.

Mobile device tracking is conducted in several ways. First, there is the network location data generated by the phone as it moves past local cell towers or Stingray devices, which law enforcement agencies use to mimic cell towers. Then there are the features built into the phone’s operating system or enabled by downloaded apps that may to highly detailed user tracking, which users unwittingly agree to by ignoring the software’s privacy policy or terms of service.

Advertisement

This collected data is sometimes sold to governments or other companies for additional data mining and user profiling. And modern smartphones also have built-in Bluetooth, Wi-Fi and GPS capabilities that can with locating and tracking user movements around the world, both from the ground and via satellites.

Your phone contains many sensors that make it useful – and easy to track.

Mobile devices can be tracked in real time or close to it. Common technical methods include traditional radio direction-finding techniques, using intelligence satellites or drones, deploying “man in the middle” tools like Stingrays to impersonate cellular towers to intercept and isolate device traffic, or installing malware such as Pegasus, made by Israeli cyberarms company NSO to report a device’s location.

Nontechnical and slower techniques of user tracking include potentially identifying general user locations from their internet activity. This can be done from website logs or the metadata contained in content posted to social media, or contracting with data brokers to any collected location data from the apps that a user might install on their device.

Indeed, because of these vulnerabilities, the leader of Hezbollah earlier this year advised his members to avoid using cellular phones in their activities, noting that Israel’s “surveillance devices are in your pockets. If you are looking for the Israeli agent, look at the phone in your hands and those of your wives and children.”

Advertisement

Researchers have shown how these features, often intended for the user’s convenience, can be used by governments, companies and criminals to track people in their daily lives and even predict movements. Many people still aren’t aware of how much their mobile devices disclose about them.

Pagers, however, unlike mobile phones, can be harder to track depending on whether they two-way communication.

Why go low-tech

A pager that only receives messages does not provide a signal that can facilitate tracking its owner. Therefore, Hezbollah’s use of pagers likely made it more challenging to track their operatives – thus motivating Israeli intelligence services’ purported attack on the supply chain of Hezbollah’s pagers.

Using low-tech tactics and personal couriers while avoiding the use of mobile phones and digital tools also made it difficult for the technologically superior Western intelligence agencies to locate Osama bin Laden for years after the 9/11 attacks.

Advertisement

In general, I believe the adversary in an asymmetric conflict using low-tech techniques, tactics and technology will almost always be able to operate successfully against a more powerful and well-funded opponent.

A well-documented demonstration of this asymmetry in action was the U.S. military’s Millennium Challenge war game in 2002. Among other things, the insurgent Red forces, led by Marine General Paul van Riper, used low-tech tactics including motorcycle couriers instead of cellphones to evade the Blue forces’ high-tech surveillance. In the initial run of the exercise, the Red team won the contest in 24 hours, forcing exercise planners to controversially reset and the scenario to ensure a Blue team victory.

Lessons for everyone

The preference for terrorist like Hezbollah and al-Qaida to avoid using smartphones is a reminder for everyone that you can be, and likely are being tracked in various ways and for various purposes.

Israel’s purported response to Hezbollah’s actions also holds a lesson for everyone. From a cybersecurity perspective, it shows that any device in your life can be tampered with by an adversary at points along the supply chain – long before you even receive it.The Conversation

Richard Forno, Principal Lecturer in Computer Science and Electrical Engineering, University of Maryland, Baltimore County

Advertisement

This article is republished from The Conversation under a Creative Commons license. Read the original article.

Read More

The post Pagers and walkie-talkies over cellphones – a security expert explains why Hezbollah went low-tech for communications appeared first on .com

Advertisement
Continue Reading

The Conversation

Tiny robots and AI algorithms could help to craft material solutions for cleaner environments

Published

on

theconversation.com – Mahshid Ahmadi, Assistant Professor of Materials Science and Engineering, of Tennessee – 2024-09-17 07:31:57

pollution is a global problem, but scientists are investigating new materials that could help clean it up.
AP Photo/Sergei Grits

Mahshid Ahmadi, University of Tennessee

Many human activities release pollutants into the air, water and soil. These harmful chemicals threaten the of both people and the ecosystem. According to the World Health Organization, air pollution causes an estimated 4.2 million deaths annually.

Scientists are looking into , and one potential avenue is a class of materials called photocatalysts. When triggered by light, these materials undergo chemical reactions that initial studies have shown can break down common toxic pollutants.

Advertisement

I am a materials science and engineering researcher at the University of Tennessee. With the help of robots and artificial intelligence, my colleagues and I are making and testing new photocatalysts with the goal of mitigating air pollution.

Breaking down pollutants

The photocatalysts work by generating charged carriers in the presence of light. These charged carriers are tiny particles that can move around and cause chemical reactions. When they into contact with water and oxygen in the , they produce substances called reactive oxygen species. These highly active reactive oxygen species can bond to parts of the pollutants and then either decompose the pollutants or turn them into harmless – or even useful – products.

A cube-shaped metal machine with a chamber filled with bright light, and a plate of tubes shown going under the light.
To facilitate the photocatalytic reaction, researchers in the Ahmadi lab put plates of perovskite nanocrystals and pollutants under bright light to see whether the reaction breaks down the pollutants.
Astita Dubey

But some materials used in the photocatalytic process have limitations. For example, they can’t start the reaction unless the light has enough energy – infrared rays with lower energy light, or visible light, won’t trigger the reaction.

Another problem is that the charged particles involved in the reaction can recombine too quickly, which means they join back together before finishing the job. In these cases, the pollutants either do not decompose completely or the process takes a long time to accomplish.

Additionally, the surface of these photocatalysts can sometimes change during or after the photocatalytic reaction, which affects how they work and how efficient they are.

Advertisement

To overcome these limitations, scientists on my team are to develop new photocatalytic materials that work efficiently to break down pollutants. We also focus on making sure these materials are nontoxic so that our pollution-cleaning materials aren’t causing further pollution.

A plate of tiny tubes, with some colored dark blue, others light blue, and others transparent.
This plate from the Ahmadi lab is used while testing how perovskite nanocrystals and light break down pollutants, like the blue dye shown. The light blue color indicates partial degradation, while transparent water signifies complete degradation.
Astita Dubey

Teeny tiny crystals

Scientists on my team use automated experimentation and artificial intelligence to figure out which photocatalytic materials could be the best candidates to quickly break down pollutants. We’re making and testing materials called hybrid perovskites, which are tiny crystals – they’re about a 10th the thickness of a strand of hair.

These nanocrystals are made of a blend of organic (carbon-based) and inorganic (non-carbon-based) components.

They have a few unique qualities, like their excellent light-absorbing properties, which come from how they’re structured at the atomic level. They’re tiny, but mighty. Optically, they’re amazing too – they interact with light in fascinating ways to generate a large number of tiny charge carriers and trigger photocatalytic reactions.

These materials efficiently transport electrical charges, which allows them to transport light energy and the chemical reactions. They’re also used to make solar panels more efficient and in LED lights, which create the vibrant displays you see on TV screens.

Advertisement

There are thousands of potential types of hybrid nanocrystals. So, my team wanted to figure out how to make and test as many as we can quickly, to see which are the best candidates for cleaning up toxic pollutants.

Bringing in robots

Instead of making and testing samples by hand – which takes weeks or months – we’re using smart robots, which can produce and test at least 100 different materials within an hour. These small liquid-handling robots can precisely move, mix and transfer tiny amounts of liquid from one place to another. They’re controlled by a computer that guides their acceleration and accuracy.

A researcher in a white lab coat smiling at the camera next to a fume hood, with plates of small tubes inside it.
The Opentrons pipetting robot helps Astita Dubey, a visiting scientist working with the Ahmadi lab, synthesize materials and treat them with organic pollutants to test whether they can break down the pollutants.
Jordan Marshall

We also use machine learning to guide this process. Machine learning algorithms can analyze test data quickly and then learn from that data for the next set of experiments executed by the robots. These machine learning algorithms can quickly identify patterns and insights in collected data that would normally take much longer for a human eye to catch.

Our approach aims to simplify and better understand complex photocatalytic , helping to create new strategies and materials. By using automated experimentation guided by machine learning, we can now make these systems easier to analyze and interpret, overcoming challenges that were difficult with traditional methods.The Conversation

Mahshid Ahmadi, Assistant Professor of Materials Science and Engineering, University of Tennessee

This article is republished from The Conversation under a Creative Commons license. Read the original article.

Advertisement

Read More

The post Tiny robots and AI algorithms could help to craft material solutions for cleaner environments appeared first on .com

Continue Reading

The Conversation

A public health historian sizes up their records

Published

on

theconversation.com – Zachary W. Schulz, Lecturer of History, Auburn – 2024-09-17 07:33:53

The presidential debate on Sept. 10, 2024, did not add much context to what the two candidates would do on beyond their own records.
Visual China Group/Getty Images

Zachary W. Schulz, Auburn University

care is a defining issue in the 2024 election – Democratic presidential nominee Kamala Harris and Republican contender Donald Trump have starkly different records on the issue. Rather than focusing on what they promise to do, let’s examine what their past actions reveal about their approaches to Medicare, the Affordable Care Act, public health infrastructure, drug policy and child abuse and domestic violence prevention.

As a specialist in public health history and policy, I have carefully examined both candidates’ records on American health care. With years of experience in the health care field and being a cystic fibrosis patient myself, I have developed a deep understanding of our health care system and the political dynamics that shape it.

Advertisement

For me, as for many other Americans, health care is more than just a political issue; it is a deeply personal one.

Medicare

During Harris’ time in the Senate, she co-sponsored the Medicare for All Act, which aimed to expand Medicare to all Americans, effectively eliminating private insurance.

At the presidential debate on Sept. 10, 2024, Harris clarified her former of “Medicare for All” by emphasizing her prior legislative efforts to preserve and expand protections for patients’ rights and access to affordable health care.

Harris’s legislative efforts, primarily around the 2017-2020 period, reflect a commitment to broadening access to Medicare and reducing costs for seniors. During that time, Harris advocated for the Medicare program to negotiate drug prices directly with pharmaceutical companies.

Advertisement

Later, as vice president, Harris cast a tie-breaking vote on the 2022 Inflation Reduction Act, allowing the to negotiate drug prices for Medicare with pharmaceutical companies.

In contrast, during Trump’s presidency, he made several attempts, some of which were successful, to cut funding for Medicare. The 2020 budget proposed by his administration included cuts to Medicare totaling more than US$800 billion over 10 years, primarily by reducing payments to providers and slowing the growth of the program.

The proposed cuts did not take effect because they required Congressional approval, which was not granted. The plan faced significant opposition due to concerns about potential negative impacts on beneficiaries.

Affordable Care Act

Harris has been a staunch defender of the Affordable Care Act, also known as the ACA or “Obamacare.” As a senator, Harris consistently voted against any efforts to repeal the ACA. She advocated for expanding its provisions, supporting legislation that aimed to strengthen protections for people with preexisting conditions and increase funding for Medicaid expansion.

Advertisement

Harris’ record shows a clear commitment to ensuring broader health coverage under the ACA. And, in the recent debate, Harris noted this record and reasserted her commitment to the act.

During his presidency, Trump led multiple efforts to repeal the ACA, including the 2017 American Health Care Act, which would have significantly reduced the scope of expansion and removed individual mandates.

Although these efforts ultimately failed in the Senate, Trump succeeded in weakening the ACA by eliminating the individual mandate penalty through the 2017 Tax Cuts and Jobs Act. In the debate against Harris, Trump reiterated his position that the Affordable Care Act “was lousy health care,” though he did not ultimately offer a replacement plan, stating only that he has “concepts of a plan.”

Donald Trump claims that as president, he had an obligation to save Obamacare, otherwise known as the Affordable Care Act, but says it is too expensive. He says he has ‘concepts of a plan’ for something to replace the ACA.

Public health infrastructure

Harris’ tenure in the Senate, from January 2017 to January 2021, shows a consistent pattern of supporting public health infrastructure. She co-sponsored several bills aimed at increasing funding for community health centers and expanding access to preventive care.

Advertisement

Harris also advocated for more federal funding to address public health emergencies, such as the opioid epidemic and the COVID-19 pandemic.

During Trump’s presidency, however, he made significant cuts to public health programs. The Trump administration proposed budget cuts to the Centers for Disease Control and Prevention and other public health agencies, arguing that they were necessary for fiscal responsibility. These proposals drew criticism for potentially undermining the nation’s ability to respond to public health emergencies, a concern that was underscored by the CDC’s struggles during the early days of the COVID-19 pandemic. Trump frequently has responded to these criticisms by asserting he “cut bureaucratic red tape” rather than essential services.

Drug pricing policy

Harris has also supported legislation to lower drug prices and increase transparency in the pharmaceutical industry. She co-sponsored the Drug Price Relief Act, which aimed to allow the federal government to negotiate drug prices for Medicare directly. She also supported efforts to import cheaper prescription from Canada. Her record reflects a focus on reducing costs for consumers and increasing access to affordable medications.

Trump’s record on drug policy is mixed. While Trump took credit for some decreases in prescription drug prices during his presidency, his administration’s most significant regulatory changes favored pharmaceutical companies. The administration’s attempts to implement a rule allowing the importation of cheaper drugs from Canada faced significant hurdles and did not lead to immediate changes.

Advertisement

Trump also ended a rule that would have required pharmaceutical companies to disclose drug prices in television ads, citing concerns over its legality.

Child abuse and domestic violence

Harris has a strong record of advocating for the prevention of child abuse and domestic violence. During her time as California’s attorney general and as a senator, Harris pushed for legislation that increased funding for domestic violence prevention programs and expanded legal protections for survivors. She has consistently supported measures to enhance child welfare services and improve coordination among agencies to protect children.

Trump’s record on these issues is less defined, but his administration did sign into law the Family First Prevention Services Act, which aimed to keep more safely at home and out of foster care by providing new resources to families. However, critics argue that the Trump administration’s broader cuts to social services and health programs could indirectly undermine efforts to combat child abuse and domestic violence. In addition, some experts suggest that Trump’s family separation policies on the southern border contributed to an increase in child trauma during his administration.The Conversation

Zachary W. Schulz, Lecturer of History, Auburn University

This article is republished from The Conversation under a Creative Commons license. Read the original article.

Advertisement

Read More

The post A public health historian sizes up their records appeared first on .com

Continue Reading

Trending