fbpx
Connect with us

The Conversation

Astro-tourism – chasing eclipses, meteor showers and elusive dark skies from Earth

Published

on

Astro-tourism – chasing eclipses, meteor showers and elusive dark skies from Earth

In 2024, much of the eastern United States will fall in the path of a total solar eclipse, like the one pictured.
Diane Miller/The Image Bank via Getty images

Vahe Peroomian, USC Dornsife College of Letters, Arts and Sciences

For years, small groups of astronomy enthusiasts have traveled the globe chasing the rare solar eclipse. They have embarked on cruises to the middle of the ocean, taken flights into the eclipse’s path and even traveled to Antarctica. In August 2017, millions across the U.S. witnessed a total solar eclipse visible from Oregon to South Carolina, with a partial eclipse visible to the rest of the continental U.S.

The interest in astronomical that this eclipse sparked will likely return with two eclipses visible in the U.S. during the next year – the annular solar eclipse on Oct. 14, 2023, and the total eclipse on April 8, 2024. But astro- – traveling to national parks, observatories or other natural, dark-sky locations to view astronomical events – isn’t limited just to chasing eclipses.

According to a recent study, 80% of Americans and one-third of the planet’s population can no longer see the Milky Way from their homes because of light pollution. As a consequence, most people have to travel to witness meteor showers and other common astronomical events.

I am a space scientist with a passion for teaching physics and astronomy and photographing the night sky. Every summer I spend several nights backpacking in the Sierra Nevada mountains of California, where the skies are sufficiently dark to allow the Milky Way to be seen with the naked eye. My son and I also like to take road trips – often along U.S. 395, the Eastern Sierra Scenic Byway – that coincide with eclipses and meteor showers.

Advertisement
Natural locations, from light, can be great places for astro-tourism.
Vahe Peroomian

Can’t miss astronomical events

There are two types of eclipses. Lunar eclipses occur when the full moon passes through Earth’s shadow. Solar eclipses occur when the new moon briefly blocks the Sun.

A diagram showing the Moon's orbit around the sun, with the Moon's two orbital nodes marked, and its orbital plane's 5 degree tilt noted.
Eclipses may occur one after another if the Moon’s nodes align with the Sun.
Nela (nyabla.net)/Wikimedia Commons, CC BY-SA

There are three types of solar eclipses. During a total eclipse, the Moon completely covers the Sun, with totality, or the time during which the Sun is completely eclipsed, lasting as long as seven minutes. During totality, those in the path of the eclipse will see the Sun’s corona, or its outer atmosphere, behind the Moon’s silhouette.

The Moon’s orbit around the Earth is an ellipse, so the Moon can appear to be 15% smaller when it’s at its farthest point from Earth, its apogee, with its size when it is at its closest point to Earth, its perigee. An annular eclipse occurs when the Moon doesn’t the entire disk of the Sun, leaving a ring of sunlight around the Moon.

Finally, a partial eclipse occurs when the Moon blocks only a part of the Sun’s disk, as the name implies.

Three eclipse images: in the first the sun is entirely blocked, with shadowy light visible from behind the Moon. Second shows the sun mostly blocked, with a thin ring visible behind the Moon. Third shows the sun partially blocked
From left to right: a total, annular, and partial solar eclipse.
Credits: Total eclipse, left: NASA/MSFC/Joseph Matus; annular eclipse, center: NASA/Bill Dunford; partial eclipse, right: NASA/Bill Ingalls, CC BY-NC

Meteor showers are a far more common astronomical than eclipses, and they are visible from any dark-sky location on Earth. Meteor showers occur when Earth’s orbit around the Sun takes it through the dust left behind by a comet. The Earth sweeps up the dust like a car speeding through a cloud of insects on the highway.

Meteor showers are named for the constellations from which the meteors seem to emanate, though it’s not necessary to stare in that direction to see meteors. The most prominent meteor showers, occurring on approximately the same dates every year, are the Perseids, named for the constellation Perseus and peaking on the night of Aug. 12-13; the Geminids, named for the constellation Gemini, on Dec. 14-15; and the Lyrids, named for the constellation Lyra, on April 21-22. The night sky will be mostly moonless for the first two this year, but a nearly full moon will make the Lyrid shower of 2024 difficult to see.

Photo showing a dark sky with several bright streaks representing meteors.
Meteor showers happen around the same time each year, and on cloudless nights can be stunning to watch.
Haitong Yu/Moment via Getty Images

Tips for aspiring astro-tourists

One of the most important factors to consider when planning an outing to stargaze or to watch a meteor shower is the phase of the Moon. The full moon rises at about 6 p.m. and sets at 6 a.m., making stargazing all but impossible because of its brightness. For ideal stargazing conditions, the Moon should be below the horizon, and the best viewing conditions are during new moon. You can use a moonrise/moonset calculator to determine the phase of the Moon and its rise and set times for any location on Earth.

Another important factor is weather. Amateur astronomers always joke that the sky is cloudy during the most interesting astronomical events. For example, most major cities in the U.S. that are in the path of the April 2024 eclipse have had cloudy skies on April 8 60% of the time since the year 2000.

Advertisement

Most Americans in heavily light-polluted . A light pollution map such as lightpollutionmap.info can identify the nearest dark-sky location, which, in my case, is hours away. These maps often use the Bortle dark-sky scale, which reports 1 for extremely dark skies to 9 for highly light-polluted city centers.

Though you may still see the brightest meteors from city suburbs, the darker your sky, the more meteors you’ll see. In general, expect to see fewer than 25 meteors per hour. To see the complex structure of the Milky Way with the naked eye, look for a location with a Bortle index of 3 or below.

It’s important to arrive at your chosen site early, preferably during daylight hours. Stumbling around in the dark at an unfamiliar site is a recipe for disaster and may also disturb others who are already at the site. Arriving early also gives time for your eyes to adapt to the dark as night falls, as it typically takes 30 minutes or even longer for your eyes to reach their full dark-adapted potential.

Make sure to carry a headlamp or flashlight that has a red light setting, as red light doesn’t ruin night vision. Avoid using your phone, as even a glance at the screen can ruin your eyes’ dark adaptation. If you’re using a sky-viewing app, switch the app to night mode.

Advertisement

Plan ahead if you’re thinking of traveling to view one of the eclipses visible in the U.S. next year. If you’re in the path of the eclipse, stay put! If you’re traveling, staying at the same location overnight before and after the eclipse can help avoid the hourslong traffic jams experienced by eclipse watchers in 2017.

A man looking up at the sky, wearing gray paper eclipse glasses.
Eclipse glasses protect your eyes while viewing an eclipse. You should never look directly at the sun.
Cavan Images/Cavan via GettyImages

Also, you should never look at the Sun directly with the naked eye, even during a total eclipse. You’ll need a pair of inexpensive eclipse glasses to watch and fully enjoy the eclipse, but get yours early, as many stores ran out of glasses during the 2017 eclipse.

No matter where you travel during the next year, don’t forget to look up at night and marvel at the beauty of the night sky away from city lights.The Conversation

Vahe Peroomian, Professor of Physics and Astronomy, USC Dornsife College of Letters, Arts and Sciences

This article is republished from The Conversation under a Creative Commons license. Read the original article.

Advertisement

The Conversation

Pagers and walkie-talkies over cellphones – a security expert explains why Hezbollah went low-tech for communications

Published

on

theconversation.com – Richard Forno, Principal Lecturer in Computer Science and Electrical Engineering, University of Maryland, Baltimore County – 2024-09-18 16:32:21

A officer examines a damaged car after thousands of pagers exploded simultaneously across Lebanon on Sept. 17, 2024.
AP Photo/Hussein Malla

Richard Forno, University of Maryland, Baltimore County

Electronic pagers across Lebanon exploded simultaneously on Sept. 17, 2024, killing 12 and wounding more than 2,700. The following day, another wave of explosions in the country came from detonating walkie-talkies. The attacks appeared to target members of the militant group Hezbollah.

The pagers attack involved explosives planted in the communications devices by Israeli operatives, according to U.S. officials cited by The New York Times. Hezbollah had recently ordered a shipment of pagers, according to the .

Advertisement

Secretly attacking the supply chain is not a new technique in intelligence and military operations. For example, the U.S. National Security Agency intercepted computer hardware bound for overseas customers, inserted malware or other surveillance tools and then repackaged them for delivery to certain foreign buyers, a 2010 NSA internal document showed. This differs from accessing a specific person’s device, such as when Israel’s Shin Bet secretly inserted explosives into a cellphone to remotely kill a Hamas bombmaker in 1996.

Hezbollah, a longtime adversary of Israel, had increased its use of pagers in the wake of the Hamas attack on Israel on Oct. 7, 2023. By shifting to relatively low-tech communication devices, pagers and walkie-talkies, Hezbollah apparently sought an advantage against Israel’s well-known sophistication in tracking targets through their phones.

pieces of a destroyed electronic device
The second wave of explosions in Lebanon involved walkie-talkies.
AP Photo

Cellphones: The ultimate tracker

As a former cybersecurity professional and current security researcher, I view cellular devices as the ultimate tracking tool for both government and commercial entities – in addition to users, criminals and the mobile phone provider itself. As a result, mobile phone tracking has contributed to the fight against terrorism, located missing people and helped solve crimes.

Conversely, mobile phone tracking makes it easy for anyone to record a person’s most intimate movements. This can be done for legitimate purposes such as parents tracking ‘s movements, helping you find your car in a parking lot, and commercial advertising, or nefarious ends such as remotely spying on a lover suspected of cheating or tracking political activists and journalists. Even the U.S. military remains concerned with how its soldiers might be tracked by their phones.

Mobile device tracking is conducted in several ways. First, there is the network location data generated by the phone as it moves past local cell towers or Stingray devices, which enforcement agencies use to mimic cell towers. Then there are the features built into the phone’s operating system or enabled by downloaded apps that may lead to highly detailed user tracking, which users unwittingly agree to by ignoring the software’s privacy policy or terms of service.

Advertisement

This collected data is sometimes sold to governments or other companies for additional data mining and user profiling. And modern smartphones also have built-in Bluetooth, Wi-Fi and GPS capabilities that can help with locating and tracking user movements around the world, both from the ground and via satellites.

Your phone contains many sensors that make it useful – and easy to track.

Mobile devices can be tracked in real time or close to it. Common technical methods include traditional radio direction-finding techniques, using intelligence satellites or drones, deploying “man in the middle” tools like Stingrays to impersonate cellular towers to intercept and isolate device traffic, or installing malware such as Pegasus, made by Israeli cyberarms company NSO to report a device’s location.

Nontechnical and slower techniques of user tracking include potentially identifying general user locations from their internet activity. This can be done from website logs or the metadata contained in content posted to social media, or contracting with data brokers to receive any collected location data from the apps that a user might install on their device.

Indeed, because of these vulnerabilities, the leader of Hezbollah earlier this year advised his members to avoid using cellular phones in their activities, noting that Israel’s “surveillance devices are in your pockets. If you are looking for the Israeli agent, look at the phone in your hands and those of your wives and children.”

Advertisement

Researchers have shown how these features, often intended for the user’s convenience, can be used by governments, companies and criminals to track people in their daily lives and even predict movements. Many people still aren’t aware of how much their mobile devices disclose about them.

Pagers, however, unlike mobile phones, can be harder to track depending on whether they two-way communication.

Why go low-tech

A pager that only receives messages does not provide a signal that can facilitate tracking its owner. Therefore, Hezbollah’s use of pagers likely made it more challenging to track their operatives – thus motivating Israeli intelligence services’ purported attack on the supply chain of Hezbollah’s pagers.

Using low-tech tactics and personal couriers while avoiding the use of mobile phones and digital tools also made it difficult for the technologically superior Western intelligence agencies to locate Osama bin Laden for years after the 9/11 attacks.

Advertisement

In general, I believe the adversary in an asymmetric conflict using low-tech techniques, tactics and technology will almost always be able to operate successfully against a more powerful and well-funded opponent.

A well-documented demonstration of this asymmetry in action was the U.S. military’s Millennium Challenge war game in 2002. Among other things, the insurgent Red forces, led by Marine General Paul van Riper, used low-tech tactics including motorcycle couriers instead of cellphones to evade the Blue forces’ high-tech surveillance. In the initial run of the exercise, the Red team won the contest in 24 hours, forcing exercise planners to controversially reset and update the scenario to ensure a Blue team victory.

Lessons for everyone

The preference for terrorist like Hezbollah and al-Qaida to avoid using smartphones is a reminder for everyone that you can be, and likely are being tracked in various ways and for various purposes.

Israel’s purported response to Hezbollah’s actions also a lesson for everyone. From a cybersecurity perspective, it shows that any device in your can be tampered with by an adversary at points along the supply chain – long before you even receive it.The Conversation

Richard Forno, Principal Lecturer in Computer Science and Electrical Engineering, University of Maryland, Baltimore County

Advertisement

This article is republished from The Conversation under a Creative Commons license. Read the original article.

Read More

The post Pagers and walkie-talkies over cellphones – a security expert explains why Hezbollah went low-tech for communications appeared first on .com

Advertisement
Continue Reading

The Conversation

Tiny robots and AI algorithms could help to craft material solutions for cleaner environments

Published

on

theconversation.com – Mahshid Ahmadi, Assistant Professor of Materials Science and Engineering, of Tennessee – 2024-09-17 07:31:57

pollution is a global problem, but scientists are investigating new materials that could help clean it up.
AP Photo/Sergei Grits

Mahshid Ahmadi, University of Tennessee

Many human activities release pollutants into the air, and soil. These harmful chemicals threaten the of both people and the ecosystem. According to the World Health Organization, air pollution causes an estimated 4.2 million deaths annually.

Scientists are looking into solutions, and one potential avenue is a class of materials called photocatalysts. When triggered by light, these materials undergo chemical reactions that initial studies have shown can break down common toxic pollutants.

Advertisement

I am a materials science and engineering researcher at the University of Tennessee. With the help of robots and artificial intelligence, my colleagues and I are making and testing new photocatalysts with the goal of mitigating air pollution.

Breaking down pollutants

The photocatalysts work by generating charged carriers in the presence of light. These charged carriers are tiny particles that can move around and cause chemical reactions. When they into contact with water and oxygen in the , they produce substances called reactive oxygen species. These highly active reactive oxygen species can bond to parts of the pollutants and then either decompose the pollutants or turn them into harmless – or even useful – products.

A cube-shaped metal machine with a chamber filled with bright light, and a plate of tubes shown going under the light.
To facilitate the photocatalytic reaction, researchers in the Ahmadi lab put plates of perovskite nanocrystals and pollutants under bright light to see whether the reaction breaks down the pollutants.
Astita Dubey

But some materials used in the photocatalytic process have limitations. For example, they can’t start the reaction unless the light has enough energy – infrared rays with lower energy light, or visible light, won’t trigger the reaction.

Another problem is that the charged particles involved in the reaction can recombine too quickly, which means they join back together before finishing the job. In these cases, the pollutants either do not decompose completely or the process takes a long time to accomplish.

Additionally, the surface of these photocatalysts can sometimes change during or after the photocatalytic reaction, which affects how they work and how efficient they are.

Advertisement

To overcome these limitations, scientists on my team are to develop new photocatalytic materials that work efficiently to break down pollutants. We also focus on making sure these materials are nontoxic so that our pollution-cleaning materials aren’t causing further pollution.

A plate of tiny tubes, with some colored dark blue, others light blue, and others transparent.
This plate from the Ahmadi lab is used while testing how perovskite nanocrystals and light break down pollutants, like the blue dye shown. The light blue color indicates partial degradation, while transparent water signifies complete degradation.
Astita Dubey

Teeny tiny crystals

Scientists on my team use automated experimentation and artificial intelligence to figure out which photocatalytic materials could be the best candidates to quickly break down pollutants. We’re making and testing materials called hybrid perovskites, which are tiny crystals – they’re about a 10th the thickness of a strand of hair.

These nanocrystals are made of a blend of organic (carbon-based) and inorganic (non-carbon-based) components.

They have a few unique qualities, like their excellent light-absorbing properties, which come from how they’re structured at the atomic level. They’re tiny, but mighty. Optically, they’re amazing too – they interact with light in fascinating ways to generate a large number of tiny charge carriers and trigger photocatalytic reactions.

These materials efficiently transport electrical charges, which allows them to transport light energy and the chemical reactions. They’re also used to make solar panels more efficient and in LED lights, which create the vibrant displays you see on TV screens.

Advertisement

There are thousands of potential types of hybrid nanocrystals. So, my team wanted to figure out how to make and test as many as we can quickly, to see which are the best candidates for cleaning up toxic pollutants.

Bringing in robots

Instead of making and testing samples by hand – which takes weeks or months – we’re using smart robots, which can produce and test at least 100 different materials within an hour. These small liquid-handling robots can precisely move, mix and transfer tiny amounts of liquid from one place to another. They’re controlled by a computer that guides their acceleration and accuracy.

A researcher in a white lab coat smiling at the camera next to a fume hood, with plates of small tubes inside it.
The Opentrons pipetting robot helps Astita Dubey, a visiting scientist working with the Ahmadi lab, synthesize materials and treat them with organic pollutants to test whether they can break down the pollutants.
Jordan Marshall

We also use machine learning to guide this process. Machine learning algorithms can analyze test data quickly and then learn from that data for the next set of experiments executed by the robots. These machine learning algorithms can quickly identify patterns and insights in collected data that would normally take much longer for a human eye to catch.

Our approach aims to simplify and better understand complex photocatalytic , helping to create new strategies and materials. By using automated experimentation guided by machine learning, we can now make these systems easier to analyze and interpret, overcoming challenges that were difficult with traditional methods.The Conversation

Mahshid Ahmadi, Assistant Professor of Materials Science and Engineering, University of Tennessee

This article is republished from The Conversation under a Creative Commons license. Read the original article.

Advertisement

Read More

The post Tiny robots and AI algorithms could help to craft material solutions for cleaner environments appeared first on .com

Continue Reading

The Conversation

A public health historian sizes up their records

Published

on

theconversation.com – Zachary W. Schulz, Lecturer of History, Auburn – 2024-09-17 07:33:53

The presidential debate on Sept. 10, 2024, did not add much context to what the two candidates would do on care beyond their own records.
Visual China Group/Getty Images

Zachary W. Schulz, Auburn University

Health care is a defining issue in the 2024 election – Democratic presidential nominee Kamala Harris and Republican contender Donald Trump have starkly different records on the issue. Rather than focusing on what they promise to do, let’s examine what their past actions reveal about their approaches to Medicare, the Affordable Care Act, public health , drug policy and child abuse and domestic violence prevention.

As a specialist in public health history and policy, I have carefully examined both candidates’ records on American health care. With years of experience in the health care field and being a cystic fibrosis patient myself, I have developed a deep understanding of our health care system and the political dynamics that shape it.

Advertisement

For me, as for many other Americans, health care is more than just a political issue; it is a deeply personal one.

Medicare

During Harris’ time in the Senate, she co-sponsored the Medicare for All Act, which aimed to expand Medicare to all Americans, effectively eliminating private insurance.

At the presidential debate on Sept. 10, 2024, Harris clarified her former support of “Medicare for All” by emphasizing her prior legislative efforts to preserve and expand protections for ‘ rights and access to affordable health care.

Harris’s legislative efforts, primarily around the 2017-2020 period, reflect a commitment to broadening access to Medicare and reducing costs for seniors. During that time, Harris advocated for the Medicare program to negotiate drug prices directly with pharmaceutical companies.

Advertisement

Later, as vice president, Harris cast a tie-breaking vote on the 2022 Inflation Reduction Act, allowing the government to negotiate drug prices for Medicare with pharmaceutical companies.

In contrast, during Trump’s presidency, he made several attempts, some of which were successful, to cut funding for Medicare. The 2020 budget proposed by his administration included cuts to Medicare totaling more than US$800 billion over 10 years, primarily by reducing payments to providers and slowing the growth of the program.

The proposed cuts did not take effect because they required Congressional approval, which was not granted. The plan significant opposition due to concerns about potential negative impacts on beneficiaries.

Affordable Care Act

Harris has been a staunch defender of the Affordable Care Act, also known as the ACA or “Obamacare.” As a senator, Harris consistently voted against any efforts to repeal the ACA. She advocated for expanding its provisions, including supporting legislation that aimed to strengthen protections for people with preexisting conditions and increase funding for Medicaid expansion.

Advertisement

Harris’ record shows a clear commitment to ensuring broader health coverage under the ACA. And, in the recent debate, Harris noted this record and reasserted her commitment to the act.

During his presidency, Trump led multiple efforts to repeal the ACA, including the 2017 American Health Care Act, which would have significantly reduced the scope of Medicaid expansion and individual mandates.

Although these efforts ultimately failed in the Senate, Trump succeeded in weakening the ACA by eliminating the individual mandate penalty through the 2017 Tax Cuts and Jobs Act. In the debate against Harris, Trump reiterated his position that the Affordable Care Act “was lousy health care,” though he did not ultimately offer a replacement plan, stating only that he has “concepts of a plan.”

Donald Trump claims that as president, he had an obligation to save Obamacare, otherwise known as the Affordable Care Act, but says it is too expensive. He says he has ‘concepts of a plan’ for something to replace the ACA.

Public health infrastructure

Harris’ tenure in the Senate, from January 2017 to January 2021, shows a consistent pattern of supporting public health infrastructure. She co-sponsored several bills aimed at increasing funding for community health centers and expanding access to preventive care.

Advertisement

Harris also advocated for more federal funding to address public health emergencies, such as the opioid epidemic and the COVID-19 pandemic.

During Trump’s presidency, however, he made significant cuts to public health programs. The Trump administration proposed budget cuts to the Centers for Disease Control and Prevention and other public health agencies, arguing that they were necessary for fiscal responsibility. These proposals drew criticism for potentially undermining the nation’s ability to respond to public health emergencies, a concern that was underscored by the CDC’s struggles during the early days of the pandemic. Trump frequently has responded to these criticisms by asserting he “cut bureaucratic red tape” rather than essential services.

Drug pricing policy

Harris has also supported legislation to lower drug prices and increase transparency in the pharmaceutical industry. She co-sponsored the Drug Price Relief Act, which aimed to allow the federal government to negotiate drug prices for Medicare directly. She also supported efforts to import cheaper prescription from Canada. Her record reflects a focus on reducing costs for consumers and increasing access to affordable medications.

Trump’s record on drug policy is mixed. While Trump took credit for some decreases in prescription drug prices during his presidency, his administration’s most significant regulatory changes favored pharmaceutical companies. The administration’s attempts to implement a rule allowing the importation of cheaper drugs from Canada faced significant hurdles and did not to immediate changes.

Advertisement

Trump also ended a rule that would have required pharmaceutical companies to disclose drug prices in television ads, citing concerns over its legality.

Child abuse and domestic violence

Harris has a strong record of advocating for the prevention of child abuse and domestic violence. During her time as California’s attorney general and as a senator, Harris pushed for legislation that increased funding for domestic violence prevention programs and expanded legal protections for survivors. She has consistently supported measures to enhance child welfare services and improve coordination among agencies to protect children.

Trump’s record on these issues is less defined, but his administration did sign into law the Family First Prevention Services Act, which aimed to keep more children safely at home and out of foster care by providing new resources to families. However, critics argue that the Trump administration’s broader cuts to social services and health programs could indirectly undermine efforts to combat child abuse and domestic violence. In addition, some experts suggest that Trump’s family separation policies on the southern border contributed to an increase in child trauma during his administration.The Conversation

Zachary W. Schulz, Lecturer of History, Auburn University

This article is republished from The Conversation under a Creative Commons license. Read the original article.

Advertisement

Read More

The post A public health historian sizes up their records appeared first on .com

Continue Reading

Trending